Gloss Open Grain Finish Over Sapele Mahogany Body And Thru-Neck.

Like all HiGuitarsUK instruments, this Raindrop electric baritone ukulele is handcrafted from quality materials and components in Nidderdale, North Yorkshire.

More photos to be added shortly.

The finish of this baritone is a departure from much of Rob’s work, utilizing a thin opaque, open grain gloss finish which allows the texture of the wood to partially show. On this example the finish of the top has a couple of small areas, visible when looked at with light in the right direction, which look like very light fingerprints in the surface. These are actually formed from fine bubbles in the finish (see the areas ringed in the last few photos). Because of these this instrument is being offered at a good discount from the usual £825 (Please note that the protective film on the scratchplate has lifted near some of its edges and this has no cosmetic issues).

A well balanced Tonerider ‘Hot Classics’ tele’ style pickup is connected through ‘Alpha’ tone and volume pot’s, to a high quality jack output. An all steel bridge utilizes through-body stringing for easy string loading, while the sturdy stainless steel bridge saddles help produce a balanced, well sustained tone. A neck-thru-body construction gives more direct vibration transmission and a permanent join, without the need for fussy neck screws. The vintage influenced styling and quality chromed hardware combine to give a classy vintage yet modern vibe.

The scale length is a slightly extended 20" (507mm) which will work well with the top 4 strings from a set of electric guitar 12s, tuned D-G-B-E with a low D. A suitable set of D'Addario strings with a wound 3rd is fitted at present.

Body: Sapele mahogany centre section with sapele wings.

Neck: Single piece sapele mahogany thru-neck, with adjustment free carbon fibre neck rod.

Fretboard: Wenge with high grade 7mm white mop shell fretboard dots and white 2mm side dots. Fretted with high grade hard American fretwire for longer fret life, with Rob’s usual very high standard of fretwork.

Neck width at nut: 35mm

Neck depth at 1st fret: 20.0mm

Neck depth at 11th fret: 20.8mm

Top nut: Bone (not reconstituted)

Pickup: Tonerider ‘Hot Classics’ single coil

Controls: Volume & tone

Bridge: Chromed steel base plate with high mass stainless steel saddles. String spacing 32mm (D - E)

Tuners: Sealed gear (quality Korean made)

Finish: Open grain gloss finished body with satin Danish oil finished neck and headstock.

Scale length: 507mm (20”)

Total length: 750mm

Body width: 210mm

Body thickness: 30mm

Weight: 1.6kg